Galingumas: 4x 1600W/ 8 Ohm, 4x 2500W/ 4 Ohm, 4x 2500W/ 2 Ohm, Hi-Z 100V arba 70V 4x 2500W. Lietimui jautrus TFT valdymo ekranas. 64 bit 96kHZ DSP garso valdymo procesorius, didelio našumo 96kHz/24 bits AD/DA konverteriai, galimi modeliai su Dante/AES67/AES3. Galinga ir efektyvi aušinimo sistema.
Pi2-3K + Dante modelio kaina €2652 su PVM.
■ Digital Control with extra large TFT display, capacitive
touch panel user interface
■ 64 bit double-precision 96kHz DSP process
■ High performance 96kHz/24 bits AD/DA converters
■ Available versions with Dante Networking (AES67) and
AES3 Digital inputs
■ Two ports Ethernet switch for daisy chain connection
■ USB port for firmware update and DSP control
■ High voltage output for high headroom sound
■ Similar power per channel in any impedance
■ Advanced power management to squeeze until the last
watt for your speakers
■ Exceptional power sharing in asymetrical loads
■ Powerful and fast response cooling system
DSP management using RAM OCS and amplifier display:
Two general working modes: User and Advanced (manufacturer)
User functionalities:
- Input Routing matrix Analog/Dante/AES3
- Input EQ section with 8 filters and 20 memories
- Input EQ Use section, predefined by the manufacturer
- System Preset selection predefined by the manufacturer
(Locked/Unlocked)
- Snapshot library management up to 100 pre-sets
- Master Control Groups
Advance functionalities (manufacturer):
- Input EQ “Use” section creation, up to 20 pre-sets
- Ways routing section (Locked/Unlocked)
- IIR EQ section: XOver, Gain, Delay, and 7 EQ filters
- FIR EQ section: linear phase XOver and EQ filters, or
custom up to 1000 taps
- RMS and Peak Dynamic control
- Snapshot library management up to 100 pre-sets (Locked/Unlocked)
- System Preset library management up to 100 pre-sets
- 5 Security levels definition to limit final user functionality
DSP Specifications - RAM_OCS Control
Overall:
• High performance 96kHz/24 bits AD/DA converters
• 64 bit double-precision 96kHz DSP process
• 0.6ms minimum process latency time
• Custom FIR process up to 1000 taps
• Dante and AES3 input versions
Input Section (x4):
• Gain, Mute and Phase inversion
• Input Delay: Up to 114 meters (333ms)
• Input EQ: 16 filters (Param., Shelving, LP, HP, BP, SB, AP)
Output Section (x4):
• Crossover Filters: FIR and IIR (up to 48dB/oct,
Butterw./LR/Bessel)
• Output Delay: 0 to 31 meters (90ms) per channel
• Output IIR EQ: 12 filters per channel (Param., Shel, LP, HP,
BP, SB, AP)
• Output FIR EQ: 20 filters per channel (Parametric,
Shelving, LP, HP, BP, SB, AP), or Custom. Up to 1000 taps
• RMS and Peak limiter per channel
Communications:
• Two ports Ethernet switch for daisy chain connection
• USB 2.0 Type B port
Miscellaneous:
• 100 Manufacturer system preset memories library
• 20 User preset memories library
• 20 User snapshot memories library
• Manufacturer/User passwords
• User control groups for virtual Equalization, Gain and
Delay
• Zone management for library, and alerts information
• Smaart® analysis software integration
Amplifier Specifications |
| Pi2-3K | Pi2-5K | Pi4-6K | Pi4-10K |
Number of channels | 2 | 2 | 4 | 4 |
Total output power | 3000W | 5000W | 6000W | 10000W |
Output Power* (All ch.’s driven/single channel) | |
8 ohms | 2x1100W 1x1150W | 2x1600W 1x1700W | 4x1100W 1x1200W | 4x1600W 1x1800W |
4 ohms | 2x1500W 1x1750W | 2x2500W 1x2800W | 4x1500W 1x1900W | 4x2500W1 1x300W |
2 ohms | 2x1450W2 1x1450W2 | 2x2500W2 1x2500W2 | 4x1450W2 1x1450W2 | 4x2500W2 1x2500W2 |
8 ohms Bridged | 3000W | 5000W | 2x3000W | 2x5000W1 |
4 ohms Bridged | 2900W2 | 5000W2 | 2x2900W2 | 2x5000W2 |
Hi-Z 100V | 2x800W | 2x2500W | 4x800W | 4x2500W1 |
Hi-Z 70V | 2x1500W | 2x2500W2 | 4x1500W | 4x1500W |
Max output voltage | 144 Vpeak | 176 Vpeak | 144 Vpeak | 176 Vpeak |
Max output current | 38 Apeak | 50 Apeak | 38 Apeak | 50 Apeak |
Total Harmonic Distortion | <0.05% |
Voltage Gain | 26dB to 44dB (1dB step) |
SNR | 106 dBA | 107.5 dBA | 106 dBA | 107.5 dBA |
Required AC Mains | |
Operating Voltage (50Hz-60Hz) | 170V-265V AC / 90V-140V AC |
1/8 Rated Power (@230V, 4 ohms) | 7 A | 8 A | 15 A | 16 A |
Dimensions W x H x D (mm) | 483x89x320 |
Weight Net (kg-Lbs) | 6-13.2 | 8.5-18.7 | 8.5-18.7 | 8.5-18.7 |
Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL™, PMS™, and SSP™ |
* IEC filtered pink noise signal (40Hz-5kHz, 12dB crest factor). 230V AC mains. |
1 PMS can limit output to prevent excessive current draw tripping the mains breaker. |
2 SSP can limit output to prevent excessive heating. |